Skullcandy wireless headphones are one of the popular products in the market. However, some users complain that their Skullcandy left earbuds not charging.
The earbuds stop charging due to a number of reasons. One obvious reason is that it is not receiving enough power. Either the charging case is the culprit or the earbud itself.
However, we need to dive deeper to diagnose the root cause. Then, we will apply some verified tricks to solve the problem.
1. Clean the Device
Sometimes, the debris or dust blocks the charging ports. So, your earbud cannot sit properly in the charging case. If it does not touch the contact points, the left earbud will not charge.
So, you should clean everything thoroughly. Clean the contact points on the earbud and in the charging case. Place the left earbud correctly in the charging case.
2. Charge Properly
The removable in-ear gel should be placed correctly on the acoustic port. Otherwise, your device will refuse to charge.
If you use mono mode, the left earbud is used more than the right one. So, its battery drains faster. Sometimes, charging does not start at once.
Hence, it is recommended to wait for a few minutes until your left earbud takes up the charge. Close the lid of the charging case firmly.
Moreover, consult the user manual to follow the correct charging instructions. A wrong charging approach can also lead to this problem.
3. Swap the Earbuds
Some of the users found this hack very useful. Just swap the positions of your earbuds. Place the right earbud in place of the left one in the charging case.
Similarly, put the left earbud in the pit for the right one. Now, let them charge and observe if they charge properly or not.
After a few minutes, rearrange the earbuds by placing them into their exact locations. Hopefully, it will help fix the issue.
4. Use the Compatible Charging Tools
The manufacturer suggests that you should use a power output not exceeding 18-Watt (5 Volts/3.6amps).
You can charge your Skullcandy earbuds by connecting to the USB port on your PC or laptop. A power bank can also be used to charge your device.
Moreover, you should also look at the charging tools. Always use the charging cable that is given with your Skullcandy earbuds.
Avoid using incompatible or cheap cables. Use a suitable AC adapter to charge the device from a wall power outlet.
5. Reset Your Skullcandy
If still the issue persists, you should try a reset. It can fix the issue of Skullcandy’s left earbud not charging. The reset process is as follows;
- Go to Bluetooth settings on the device to which your Skullcandy earbuds are connected.
- Un-pair your earbuds by clicking the ‘Forget’ or ‘Disconnect’ button. Now, turn OFF the Bluetooth on your device.
- Turn OFF both earbuds manually by pressing the back button for 6 seconds.
- When the LEDs should go OFF, place both earbuds in the charging case.
- Take out one of the earbuds and hold the button on its back for 10 seconds. Next, put this earbud back in the charging case.
- Take out the other earbud and repeat the same process with it.
- When the LED lights on both earbuds flash red, take them out of the case at the same time.
6. Check the Power Source
Another reason for the charging issue can be a bad power source. The power outlet may be faulty and cannot supply enough current.
You should plug the charging case into a different power outlet. Make sure it is working properly. Another useful trick is, turn OFF your earbuds before placing them in the charging case.
7. Contact the Manufacturer
Skullcandy wireless earbuds come with a 1-year warranty. You can contact the manufacturer to submit a complaint.
If still, your Skullcandy left earbud is still not charging, we suggest you contact Skullcandy and explain your problem.
Sometimes, the unit is defective by default. So, you can save your money by asking for a replacement.
Frequently Asked Questions
Read the following section if you have further queries regarding your Skullcandy earbuds.
Why my Skullcandy left earbud is not charging?
There are a number of reasons why your Skullcandy left earbud is not charging. For example, the charging contact points are dirty, the charging cable or adapter is incompatible or the battery is defective.
Can I charge my Skullcandy earbuds without a charger?
If you don’t have an adapter, you can still charge your earbuds. Take the USB cable and connect the earbuds case to the USB port on your computer using this cable. However, the computer should be ON.
What happens if I overcharge my earbuds?
The earbuds are programmed to charge up to their limit. Once they are fully charged, the case will cut the power supply automatically. However, you should also take care and disconnect the charger once the device has gained maximum power.
Also read: Fix the Skullcandy Left Earbud Not Working
Final Words
This article is a complete guide for you. We have listed all the possible solutions to your problem.
Hopefully, one of them has fixed your Skullcandy earbuds not charging issue. Let us know your reviews in the comment section.