Skullcandy wireless earbuds come in various models. However, almost all the versions have a similar control setup. You can turn ON Skullcandy wireless earbuds both manually and automatically.
In this article, we will tell you the general method to turn ON your Skullcandy earbuds.
This guide will also tell you the specific method of turning ON various models of Skullcandy wireless earbuds. So, let us start with the common method.
General Methods to Turn ON Skullcandy Wireless Earbuds
Method 1: Automatic
Almost all of the Skullcandy wireless earbuds come in a smart case. This case serves a dual purpose, it is used as a storage case for your earbuds as well as charge the buds.
When you take them out of the case, your earbuds can turn ON automatically. This method works for all models of Skullcandy wireless earbuds.
Open the case lid and take out the earbuds. They will turn ON automatically, a blue indicator tells you that earbuds are powered ON. Place the earbuds back in the charging case and they will turn off automatically.
If you want to use only one earbud, take it out of the charging case and leave the other in the case. Similarly, you can turn off one earbud by putting it back in the case.
It is recommended to keep your earbuds in their case while you are not using them. Because it saves extra battery drainage and you can use them for a longer time duration.
Related: Reset Skullcandy Wireless Earbuds
Method 2: Manual
In addition to the automatic method, you can also turn ON/Off your Skullcandy earbuds manually. Most of the Skullcandy wireless earbuds have a touch panel on their back.
You can identify it by the Skullcandy logo on it. This touch panel is used to perform multiple functions. However, some Skullcandy earbuds have a button on their back that works the same way.
To turn ON your Skullcandy wireless earbuds, touch and hold the panel for 4 seconds. Repeat the same process with the other earbud. Release it when the LED indicator flashes blue.
If you want to turn Off your earbuds, hold the panel for 6 seconds or until the LED goes off. This method works for Skullcandy Push wireless earbuds.
Each Skullcandy wireless earbud has a manual button or touch panel on its back which has the Skullcandy logo on it.
For example, Skullcandy Jib earbuds have touch control on their back while Dime has a physical button. However, both can be turned ON by the same method.
You can turn ON your Skullcandy Jib, Dime, Indy, Sesh, and Inked wireless earbuds by the following process.
Press and hold the button/touch panel on each earbud for 2 seconds. The LED indicator will flash blue to inform you.
To turn Off your earbuds, hold the button for 4 seconds.
If you hold the button for 4 seconds while the earbuds are powered ON, they will enter into pairing mode. The LED will blink red and blue on the left earbud only.
Related: Fix Skullcandy Left Earbud Not Working
Final Words
So, you can turn ON your Skullcandy earbuds in two ways. They have an automatic turning ON/OFF feature. For manual methods, they have a button or panel.
Hopefully, this article has ended your quest of turning ON Skullcandy wireless earbuds. Feel free to ask any questions or share your suggestions.