JBL Flip 5 is a popular and best-selling speaker. This smart Bluetooth speaker comes in different colors. It is a portable and waterproof device, hence ideal for outdoor use. JBL Flip 5 is equipped with a rechargeable battery. The Lithium-ion Polymer battery is powerful enough to play for maximum of 12 hours. It takes 2.5 hours to fully charge the battery. Today we will help you if your JBL Flip 5 speaker is not charging.
But, sometimes the battery may pose issues. For example, the most common problem is the battery not charging. This issue arises because of a number of reasons. For example, you may be using a faulty charger or charging cable. Other possibilities are bugs in the software, defective circuit board, or exhausted battery. However, it seems difficult to find out the real problem.
But, do not worry. We have found the best solutions for your JBL Flip 5 not charging. Follow these guidelines to sort out the real issue if your JBL Flip 5 is not charging.
1. Clean the Charging Port
Generally, users do not care about this factor. But, dirt in the charging port can stop the charging process. Because the charger cannot fit properly. JBL speakers are waterproof, hence they are most likely to be used outdoor. So, the charging port and other holes accumulate dust, debris, or moisture.
Regularly clean the charging port and other openings on your JBL Flip 5. Use a toothpick, dry toothbrush, or paintbrush, to clean the charging port. Blow off to remove the remaining dust. Now, connect the charger again.
2. Use Another Charge
The one major reason behind JBL Flip 5 is not charging is a defective charger. The charger may be damaged due to a short circuit. Sometimes, the USB port, charging brick, or internal circuit of the charger gets damaged. So, it stops charging the speaker.
This problem has a very simple solution. Just use another charger to charge your JBL Flip 5. You can use the charger of your smartphone for your speaker. If it works then surely the charger you were using previously is defective.
Purchase a new charger for your JBL Flip 5. Avoid buying cheap and low-quality chargers as they affect the battery life. Always buy a genuine charger from a trusted supplier.
3. Replace the Charging Cable
A faulty USB charging cable may be the reason your JBL Flip 5 is not charging. The cord becomes defective due to bends or strain. So, you can check your existing charging cord by replacing it with another one. You can use any USB Type-C cable to charge your JBL Flip 5.
The charging cord of your smartphone can also work with the speaker. If another charging cord successfully charges your JBL Flip5 then you should buy a new charging cable for your JBL Flip 5.
To avoid damage to the charging cable, store it in a safe place. Do not bend and twist the cord and do not put a strain on it. Avoid leaving the charger plugged in the power outlet after the speaker is charged.
Related: JBL Flip 5 Won’t Turn OFF
4. Restore Factory Settings
Factory reset or hard reset is the first and foremost solution if your device is posing any issue. After constant use, the software of the speaker may get some bugs and slows down. Just like your smartphone, JBL Flip 5 also needs cleaning.
Factory reset will bring the speaker to its default factory settings. All the data stored on the device will be removed. This is necessary to improve the functioning of your JBL Flip 5. You can perform this action very easily just in a minute.
Make sure, you have disconnected all the devices and accessories before starting the process. Follow these instructions;
- Press the power button and turn on your JBL Flip 5.
- Press and hold the ‘Play’ and ‘Volume Up’ buttons at the same time. Hold on till 5 seconds or more until the speaker turns off.
- Wait a few moments and press the power button again to turn on the device. If your speaker is in pairing mode, the factory reset is completed.
- Connect the charge to your speaker and check its performance. If this solution does not work, try the next.
5. Replace the Battery
If none of the above solutions work then you should examine the battery of your speaker. JBL Flip 5 is the latest model launched in 2019. So, relatively you have a new speaker. There are fewer chances of its battery is damaged. However, if the battery gets defective when it is continuously exposed to water and heat or overcharged frequently.
Although JBL Flip 5 is an IPX7 waterproof yet you should not always submerge it into water. Because the water may enter the circuit board or battery and will damage them. Another reason may be a manufacturing defect in the battery. This issue is revealed very early. In this case, you should consult the manufacturer to replace the battery.
If the battery of your speaker is damaged, you should replace it without delay. If your JBL Flip 5 has expired its warranty, you can purchase the battery from a third-party supplier. You can get the battery replaced at a service center or can do it yourself. We have published another article that will thoroughly guide you that how to replace the battery of JBL Flip 5.
6. Examine the Circuit Board
The Circuit board is responsible for sending current to the battery. Any fault in it prevents the speaker from charging. The circuit board gets damaged due to overcharging or overheating. Constant contact with water can also damage the circuit board. You cannot know the fault in the circuit board. So, you should take your JBL Flip 5 to the service center. They can fix the problem.
Related: JBL Flip 5 Not Turning ON
Final Words
This article guided you thoroughly that how can resolve the issue of JBL Flip 5 not charging. We explained all the reasons and their solutions. In addition, we have suggested some tips to extend the life and to improve the performance of your device. We hope this article will help you in solving the issue of your JBL Flip 5 not charging. Stay connected by giving us your feedback.
