Hisense is a cheap but durable TV brand. So, most people prefer to buy it. Sometimes, your Hisense TV poses certain issues such as the red light blinking 2/3/6 times.
The TV turns OFF and ON automatically. In some cases, nothing is displayed on the screen but the red light is ON. While in other situations, either the sound or the picture disappears.
The number of times the red light blinks indicates a particular issue. For example, if the light blinks 2 times in a row, the unit has a power shortage.
Likewise, 3 or 6 blinks refer to other issues. In this article, I will guide you fully that how can you detect the problem.
Further, I will suggest some effective tricks to fix your Hisense TV. So, stay with me.
Table of Contents
My Strategy to Diagnose the Problem in a Blinking Hisense TV
Some days ago, I visited my friend’s place for enjoying “Doctor Strange” together. While we were watching the movie, her Hisense TV blinked red 2 times.
The TV went OFF and then came back again. A few minutes passed calmly, then again the red light blinked 6 times. The TV came back but we were seeing no picture.
This ruined our mood. I power cycled her Hisense TV but the same issue returned after 10 minutes.
I suspected that it has a power issue. So, I decided to fix it right there. I spent almost 30 minutes trying different troubleshooting tricks. Finally, I diagnosed the problem.
Understanding a Hisense TV Blinking red 2, 3, or 6 Times
The number of times the red light blinks indicate different sort of problems. For example, red light blinking 2 times indicates that there is a power issue.
It can be solved by power cycling, resetting, or repairing the mainboard. The TV goes in standby mode and can be recovered shortly.
If the red light blinks 3 times, the LED rail has been shut down due to a power surge or excessive current. 3 blinks also tell that the internal circuit board of your TV is damaged.
While 6 blinks refer to a more serious issue. For instance, the backlight, mainboard, inverter boards, or power supply board have failed.
All these components can be checked with a multimeter. This device will detect the malfunctioning or failed part.
Hence, the TV can be fixed only by replacing or repairing a hardware component.
Do the Self-Diagnostic Test
This test is very useful. I conducted it on my friend’s Hisense TV. It brings the fault codes on the screen and a list of problems. You can access the diagnostic screen as follows;
- Press the Display, Channel, 5, and Vol. Minus buttons and then the Power button. You can do it on the remote as well as on the TV set.
- A screen with a list of problems will appear.
- It will show short forms like “OVP”, “OCP”, “V STOP”, or others.
- Check the error code in the user manual. This diagnostic test can help you find the exact solution.
Note: Clear the error code screen. Press Display, Channel, 5, Volume Plus, and Power buttons. Then, press 8 and hit the Enter button. It may reset your TV to the factory settings.
Sometimes, the test cannot work. In this situation, you should follow the guidelines given below.
Do You Want to Fix Your Hisense TV at Home?
So, after diagnosing the problem, I also devised the solution. I passed that Hisense TV through a series of trials and tests.
If you intend to fix your troubling Hisense TV at home, you have to follow my suggestions.
The troubleshooting steps (I am listing below) will lead you to the diagnosis and finally to the resolution.
1. Try a Power Cycle
Power cycling the TV should be your first and foremost step. It helps remove temporary bugs and corrupted files. Here is how to power cycle your Hisense TV;
- Unplug the power cable from your TV or from the wall power outlet.
- Leave the unit turned OFF and unplugged for 1-2 minutes.
- Now, connect the power cord again. Press the “Power” button to turn ON your TV.
- You can increase the time and repeat the process twice or thrice for better results.
2. Try a Soft Reset
If a simple power cycle does not help, try a soft reset method. It will not delete any data on your TV but will clean it. The process is as follows;
- Remove the power cord of your TV from the wall power outlet.
- Press and hold the “Power” button located on your TV. Release the button after 15 seconds.
- Wait another 15-30 seconds before holding the power button again.
- Do the same one more time. Plug your TV into the power outlet after 5 minutes. Now, press the power button to turn the unit ON.
3. Check the Power Supply
Insufficient or discontinuous power can be a reason your Hisense TV is blinking 2, 3, or 6 times. Plug the power cord firmly into the outlet.
Check whether the electric outlet is working properly or not. Moreover, try switching your TV to a different outlet. Do not use extensions, instead connect the TV directly to the wall outlet.
If everything is fine, the power supply board inside the TV can be defective. It receives power from outside and delivers it to the other parts. Hence, it needs to be inspected and replaced.
4. Examine the Mainboard
If the basic troubleshooting tricks make no difference, the issue is related to the hardware. An intricate reason is a faulty mainboard.
This part is very important and holds various vital components such as fuses, capacitors, and wires. So, any damage to the mainboard results in blinking.
You can access it by opening up your TV. But do so if you have some know-how of electronics.
Check each component through a multimeter and replace the defective one. Otherwise, call a technician for proper diagnosis and repair.
5. Submit a Claim
In some cases the issue is built-in. Maybe your Hisense TV is a few days old. Hence, you can submit a complaint to the company because your unit is under warranty.
Ask for a replacement or refund. Contact Hisense online and explain your problem. Either they will send a mechanic to fix your TV at home or you will have to send the unit to the company.
But, remember the company does not accept claims if the user is responsible for damaging the device.
Frequently Asked Questions
Let us learn something more about your Hisense TV. Read the answers to the common questions below.
How much does replacing the TV’s mainboard cost?
Replacing the mainboard can cost you anywhere between $35 to $150. However, the price depends on the TV size. If the TV is bigger, the replacement is expensive and vice versa. So, you should either consider replacing the TV itself.
What to do if my Hisense Roku TV does not turn ON?
If the red light on your Hisense Roku TV is glowing but the TV does not turn ON, there is a power issue. Either the electric power supply is the culprit or the hardware of the TV unit is defective. Try unplugging your TV for 10 minutes and plug it back again.
Is a Hisense TV reliable?
Hisense TVs are generally reliable. It is a cheap and durable brand with high-tech and high quality. However, the average life depends on your usage. It comes with a 1-year hardware warranty.
What type of screen Hisense TV uses?
Hisense has manufactured different TV series. Generally, Hisense TVs have OLED panels. They are 4K UHD TVs. It delivers a good contrast ratio, brightness, quick response time, and reflection-handling.
Also read: Hisense TV no Picture
Currently, you have finished reading an expert guide. It includes the master solutions to fix your Hisense TV that blinks red a number of times. Apply these hacks and save your money.